HelpNew to spineRevit user WorkflowRevit user: Would you like to start adding classes, types and properties in Revit?

Revit user: Would you like to start adding classes, types and properties in Revit?

Would you line to start adding classes, types and properties in Revit? Then follow this workflow!

1. Enrich your models with classes and types

Begin your journey of digitizing and structuring building data, enriching building elements with information that structures and identifies. This provides better sharing, understanding and communication around building data.

Give your Revit models - objects, rooms and systems - classes that describe the individual component, the room, the technical or functional system.
Divide the classes into types and identify types to rooms, types of objects and types of systems. Make these types easily recognizable with a type name, and easily communicable with an ID.

2. Add Identification in Revit

Identify your objects to be quickly found by both you and your project colleagues. In addition to dividing and giving your building elements type IDs, you can give individual object instances Single Level IDs, as well as locate object instances relative to rooms or other objects with location IDs.

3. See project content in the spine portal

Take advantage of your structured building data.
Review and get an overview of building data. Set up criteria for the data you want to look at and share it with project colleagues.

4. Add properties to your spine project in the spine portal

Give your building data - types and instances - information.
Get more out of your Revit work by adding more properties to your spine project in the spine portal.
Control which disciplines can add information to your project and push properties down into the Revit models.

5. Add and synchronize properties in Revit

Add the I in BIM to your models. 3D models are great for visualization, volume and quantities. But if you really want to take advantage of your models, you need to add information that tells you something about the building elements.
When information is directly linked to the 3D objects, it is easier to communicate the information around the project organization together with the model.
A fire rating, an u-value, a compressive strenght, a maintenance interval or an enterprise number, are easier to locate when linked to an object ID, rather than to a text or PDF document.
Information can be assiciated with types of building elements - the Type ID, and instances of objects - the Single Level ID.

6. Create type and instance IDs in the spine portal

Work with types and instances in the spine portal.
Would you like to add more types that can be used in Revit? Or are there building elements that shall not be modeled?

Then you can create them in the spine portal and include them in the overall data summary.

7. Consistency Check your Revit model

Check the consistency between your Revit model and your spine project.

Check for objects missing classes, type IDs and Single Level IDs. As well as check whether there are objects deleted in either the model or the spine project, and decide if they should be restored or deleted in both places. In addition, you can synchronize property values for all objects in the model at once.

8. Manage Revit Family Types

Get an overview of your Revit Family Types and map them with CCS types or create CCS types based on your Revit Family Types.

0 Comments

Add your comment

E-Mail me when someone replies to this comment